Product Overview
Your squeegee has nowhere to live. It leans in the corner, slides down the tiles, or ends up on the floor of the shower. The suction hook you bought to fix that let go weeks ago — probably in the middle of the night.
This one hooks over the shower screen itself. No drilling, no adhesive, nothing stuck to your tiles. Put it on in a second, lift it off in a second, and it stays exactly where you left it.
Why this one works
- ✓ Nothing is drilled, glued or stuck. It hooks over the screen and holds by shape alone.
- ✓ A wide 102 mm cradle. Chunky, flat and awkwardly shaped squeegee heads sit in it properly — the kind that slip straight through a narrow hook.
- ✓ Slides along the edge. Nudge it aside when you're cleaning, or shift it to the other end. No unmounting, no re-seating, no repositioning ritual.
- ✓ Eight sizes. Matched to your screen rather than almost fitting it.
- ✓ Your colour. Match your tapware or disappear into the tiles — at no extra cost.
- ✓ Landlord-proof. Lifts off leaving no mark, no residue and nothing to make good.
Which size do I need?
Frameless screen (glass only, no metal edge): measure the thickness of the glass panel — that's the number you need. If you can't measure it confidently, send us a photo with a ruler or a coin against the edge and we'll check before you order.
Framed screen (square metal frame around the glass): measure across the flat face of the frame the holder will hook over — not the glass. Choose the matching size from 20 mm to 40 mm.
A digital caliper is ideal, but a ruler held square against the edge will do. If your measurement falls between two listed sizes, message us before ordering — a snug fit is what makes this hold, so it's worth thirty seconds to confirm.
Specifications
- Printed in PETG — stands up to constant humidity and hot water without softening or going brittle
- 102 mm between the cradle lips — suits standard and oversized shower squeegees
- Wipe clean; no rust, no staining, nothing to corrode
- Printed to order and dispatched from Australia within 3–5 business days (larger packs, within 5–7)
Those are dispatch times, not delivery times. Delivery depends on your location and carrier.
How it compares to other shower squeegee holders
| This holder | Suction cup | Adhesive strip | Drilled fixing | |
|---|---|---|---|---|
| Damage risk | ✓ None | None | Can lift paint or render | ✗ High — glass can't be drilled; risks waterproofing |
| Works on textured tile or stone | ✓ N/A — mounts to the screen | ✗ No | Poorly | ✓ Yes |
| Holds wide or awkward handles | ✓ 102 mm cradle | Depends on the hook | Depends on the hook | Depends on the hook |
| Can be repositioned | ✓ Slides along the edge | ✗ Must be re-seated | ✗ No | ✗ No |
| Removable without a trace | ✓ Instantly | ✓ Yes | Once only | ✗ No |
| Colour choice | ✓ Yours, no extra cost | Usually white or chrome | Usually white or chrome | Usually white or chrome |
| Typical failure | Wrong size ordered | Loses its seal over time | Bond fails in humidity | Permanent; rental dealbreaker |
Common questions
Can I drill into a glass shower screen to mount a holder?
No. Shower screens are toughened (tempered) glass, which shatters if drilled — it cannot be cut or bored after manufacture. Any holder for a glass screen must hook over, clamp, suction or adhere. This holder hooks over, so nothing is drilled and the glass is never touched by a tool.
Why do suction cup squeegee holders keep falling off?
Suction needs a smooth, non-porous, continuous surface. Textured tile, grout lines, natural stone and fibreglass all let air seep in, and the seal weakens as the rubber ages. This holder doesn't rely on a seal at all — it holds by shape, so nothing degrades and there is nothing to re-seat.
How do I hang a shower squeegee without drilling or adhesive?
Hook it over the shower screen itself. This holder slides over the top edge of a frameless glass panel or a framed screen profile and holds by shape, so nothing touches your tiles, your grout or your waterproofing.
Will it hold a squeegee with a wide or unusual handle?
There is 102 mm between the cradle lips, so flat, chunky and irregularly shaped squeegee heads sit in it rather than falling through a narrow hook. To check yours, measure the widest part of the handle bracket where it meets the blade — anything under 102 mm will fit. If it's close, or the shape is unusual, send us a photo before ordering and we'll tell you honestly whether it will sit properly.
Can I move it after I've fitted it?
Yes — slide it along the edge to wherever you want it. Push it aside while you're cleaning the screen and slide it back. There's no adhesive to weaken and no suction to re-establish, so moving it costs nothing.
Will this work in a rental?
Yes. Nothing is drilled, glued or stuck. It lifts off in a second and leaves no mark, so there's nothing to make good at the end of a lease.
What if my screen isn't one of these sizes?
Because each holder is printed individually, adapting the model to an unlisted size is often straightforward. Send us the measurement and we'll let you know.
Can I order different colours and sizes together?
Yes. Each pack is printed in the one colour and size you choose for it, so if your bathrooms don't match — a frameless screen in the ensuite, a framed one in the main bathroom — select what each of them needs and add both to the same order. There's no limit on how many you combine. The larger packs are there for anyone fitting out several properties at once.
Do you supply trade or bulk quantities?
Yes. The pack options above cover most orders. For twenty or more, ask us for a trade price — worth doing if you manage properties, fit out bathrooms or run short-stay rentals.
Colour
Every holder is printed to order in the colour you choose above, at no extra cost. Match your tapware, match your tiles, or pick something that makes you smile every morning. Screen colours vary, so shades may differ slightly from what you see here.
Want a colour that isn't listed? Message us before ordering and we'll check what's on the shelf. Solid colours print best — we'd steer you away from metallics, since printed "brass" rarely matches real brass hardware.
What it won't do
- Needs an edge to hook over — no good on a tiled wall or a walk-in with no screen
- Fits square and rectangular frame profiles, not curved or round ones
- PETG, not metal — avoid acetone and solvent-based cleaners
About the printed finish
Each holder is printed layer by layer, so you may see fine layer lines or a subtle surface texture. That's a natural characteristic of the process rather than a defect — and it's the same reason we can offer eight sizes and a colour to match your bathroom, instead of one moulded shape that almost fits everyone.